您现在的位置是:网站首页>内容内容
在Linux系统中将SSD当块设备缓存的方法_其它系统_操作系统_
2024-04-18 01:32:14 【512953070@qq.com】 16人已围观
简介 在Linux系统中将SSD当块设备缓存的方法_其它系统_操作系统_
原理
写操作先缓存到ssd硬盘上,然后通过一定策略写到普通硬盘上;
读操作热点数据可以缓存到ssd硬盘上,提高读取数据的速度。
软件 ssd 缓存开源软件主要有bcache ,flashcache
bcache 需要编译最新的内核,要求比较高,配置比较复杂,目前主要用于测试环境;
flashcache 是facebook内部使用的ssd cache软件,开源出来供大家使用,目前有人编译出rhel6的rpm包,在centos6上可以直接安装使用。
本次初步测试了flashcache
测试环境
sdc为 ssd 硬盘 160G*4 raid 10 用fio测试 4k 写iops为 5433
sdb为 普通sas硬盘 146G*2 raid 1 用fio测试 4k 写iops为 447
初步简单测试结果:
4k 随机写可以达到 5014
4k随机读可以达到45874
flashcache 安装配置方法
安装
rpm -Uvh http://elrepo.org/elrepo-release-6-5.el6.elrepo.noarch.rpm
yum install flashcache-utils kmod-flashcache
配置:
用sdc 做sdb的缓存
flashcache_create -p back cachedev /dev/sdc /dev/sdb
cachedev cachedev, ssd_devname /dev/sdc, disk_devname /dev/sdb cache mode WRITE_BACK
block_size 8, md_block_size 8, cache_size 0
Flashcache metadata will use 1192MB of your 24016MB main memory
可以用3种方式:
Writethrough - safest, all writes are cached to ssd but also written to disk
immediately. If your ssd has slower write performance than your disk (likely
for early generation SSDs purchased in 2008-2010), this may limit your system
write performance. All disk reads are cached (tunable).
数据同时写到ssd和普通硬盘
Writearound - again, very safe, writes are not written to ssd but directly to
disk. Disk blocks will only be cached after they are read. All disk reads
are cached (tunable).
数据同时绕过ssd,直接写到普通硬盘
based on various policies are written to disk later. All disk reads are
cached (tunable).
数据先写到ssd,随后写到普通硬盘
查看
flashstat
======================================================================================================
Flashstat: a tool for flashcache status per second
Author : NinGoo(seaman.ning@gmail.com)
Version : 0.3
======================================================================================================
SSD Device: /dev/sdc Disk Device: /dev/sdb Cache Mode: WRITE_BACK
Capacity: 303998M Block Size: 4K Meta Block Size: 4096b
Total Blocks: 77823488 Cached Blocks: 9 Cached Percent: 0
Set Numbers: 512 Dirty Blocks: 0 Dirty Percent: 0
cache_all: 1 reclaim_policy: FIFO dirty_thresh_pct: 20
max_clean_ios_set: 2 max_clean_ios_total: 4 skip_seq_thresh: 0K
======================================================================================================
time read/s write/s diskr/s diskw/s ssdr/s ssdw/s uread/s uwrit/s metaw/s clean/s repl/s wrepl/s hit% whit% dwhit%
03-13 14:51:20 0 0 0 0 0 0 0 0 0 0 0 0 0|10 0|0 0|0
Disk /dev/mapper/cachedev: 146.8 GB, 146778685440 bytes
255 heads, 63 sectors/track, 17844 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0002da0a
Device Boot Start End Blocks Id System
使用:
可以当一个块设备来使用,划分vg lv
pvcreate /dev/mapper/cachedev
Physical volume "/dev/mapper/cachedev" successfully created
vgcreate ssdcachetest /dev/mapper/cachedev
Volume group "ssdcachetest" successfully created
lvcreate -L 100G -n ssdcache_test_lv1 ssdcachetest
Logical volume "ssdcache_test_lv1" created
删除
flashcache_destroy /dev/sdc
热评
- 如何更好地设计网站?网站设计的三点原则_建站经验_网站运营_
- 如何设计好网站页脚呢?网页页脚的几个设计建议_建站经验_网站运营_
- 网站收录正常没排名的情况几种原因与解决方法_建站经验_网站运营_
- 电商运营经验贴:从用户拉新 商品选择入手_建站经验_网站运营_
- 什么是网站空间 要如何选择_建站经验_网站运营_
- 跨界运营不只是换个工作_建站经验_网站运营_
- 企业网站建设有哪些意义?企业网站建设的重要性和必要性_建站经验_网站运营_
- 互联网+时代 H5自助建站能为企业做什么_建站经验_网站运营_
- 企业网站建设怎么做?企业网站建设提升特色网站设计方法_建站经验_网站运营_
- 【官方说法】官网保护的审核时间多久?官网保护工具如何通过申请?_建站经验_网站运营_